Bullet Electric RC Buggy - Brushed Version 2.4GHz

Évaluation:
100% of 100
Prix Spécial 159,99 € Prix normal 179,99 €
Épuisé
SKU
A2011T-V1
The Bullet is a high spec electric radio controlled buggy that is amazing value for money. It comes fully built with everything included but at a low price. This is a proper radio controlled race ready model with front and rear gear differentials, electronic speed controller and powerful 540 motor. The RC buggy comes with a 2.4GHz transmitter which enables you to have interference free use and longer range and better reliability.
SAVE 11%

The Bullet is a high spec electric radio controlled buggy that is amazing value for money. It comes fully built with everything included but at a low price. This is a proper radio controlled race ready model with front and rear gear differentials, electronic speed controller and powerful 540 motor.

The Bullet buggy is a high performance, high speed machine. With its unique narrow chassis and sway bars fitted as standard the model performs both on and off the tarmac. The 4WD system with front and rear differentials evenly distributes the massive power to the wheels making the Bullet a race winner.
The 4WD system not only improves handling but reduces wheel spin giving quicker acceleration. Each wheel has its own independent wishbone suspension with an oil filled shock which also improves the performance of the model. Along with the 4WD it also means the Bullet has good off road abilities. The electronic speed controller allows you to put the power down gradually as needed with the brake allowing you to enter corners quicker and then power out of the other side. Pushing the brake a second time activates reverse allowing you to back up if you get stuck. The front a rear gear differentials improve cornering massively and like on a real car are essential at high speeds.

The buggy is all controlled by a 2.4GHz transmitter which unlike the old crystal system allows many models to be used in one area with out any interference.

A2011T-V1 Box

 

1:10th SCALE MODEL
This 1:10th scale buggy measures in at 390mm x 260mm x 140mm (length, width, height)

A2011T-V1 Dimensions

 

ALUMINIUM 4WD SHAFT DRIVE SYSTEM
This model has a 4 Wheel Drive system with a strong aluminium drive shaft evenly transferring the power from the rear to the front. The 4WD system gives better off road ability and better handling.

A2011T-V1 4WD

 

HIGH SPEED 540 BRUSHED MOTOR
A big 540 fast motor that can send your model around tracks at high speeds.

A2011T-V1 Motor

 

OIL FILLED SHOCKS WITH ALUMINIUM SHOCK TOWERS
Both the tension and angle of the shocks can be adjusted to suit your driving preference and terrain.

A2011T-V1 Shocks

 

7.2v BATTERY
This model comes complete with a 7.2v Tamiya type battery and charger. These batteries made specially for RC cars are designed to pump the power out quickly to push the model to the maximum speed.

A2011T-V1 Battery

 

SLEEK BODY SHELL
A pre-painted modern designed body shell with high downforce wing.

A2011T-V1 Body Shell

 

2.4GHz RADIO
All new 2.4GHz radio technology is used. This is more reliable than the old FM equipment and allows mulitiple RC cars to be used in the same area without interference.

A2011T-V1 Transmitter

 

ALUMINIUM CHASSIS
A solid blue aluminium chassis with countersunk screws which makes the underneath very smooth

A2011T-V1 Chassis
Plus d’information
Échelle1:10
AssembléRTR
Conduire4WD
Pour TerrainHors-Piste
Équipement Radio2.4 GHz
TypeBuggy
MoteurBrushed
Spécifications
  • Largeur: 260MM
  • Hauteur: 140MM
  • Longueur: 390MM
  • Empattement: 280MM
  • Ratio de vitesse: 8.95:1
  • Roue dia.: 80-30MM
  • Garde au sol: 25MM
  • Radio: 2.4GHz
  • Batterie: 7.2V Ni-Mh Tamiya type
  • Moteur: 540 Brossé
  • ESC : Proportionnelle vers l'avant, frein, revers proportionnel.
  • Échelle: 1:
Caractéristiques

  • Châssis en aluminium massif avec vis contre-plongée
  • Système d'entraînement 4WD Shaft
  • Moteur brossé 540 de haute puissance
  • Chocs remplis d'huile
  • 7.2V Tamiya type pack de batterie avec chargeur
  • Différentiels de bevel avant et arrière
  • Contrôleur de vitesse électronique
  • Coquille de corps exclusive pré-peinte
  • 2.4Ghz matériel radio

Nécessaire à utiliser
  • 4 x Piles AAA
Lien de rechange/spare-parts/acme-racing/acme-bullett-buggy-spare-parts.html

INFORMATIONS SUR LA LIVRAISON

Le coût et le temps de livraison dépendront de la taille des articles commandés

PIÈCES DE RECHANGE

Ils prendront entre 2-5 jours ouvrables. Le coût dépend du nombre de pièces et de la taille.

Germany: €3.70 - €7.40
Spain: €3.70 - €13.30
France: €3.70 - €11.80
Ireland: €3.70 - €8.90
Italy: €3.70 - €13.30
Netherlands: €3.70 - €8.99
Portugal: €3.70 - €10.30
Denmark: 48kr. - 72kr.
Sweden: 52.80kr - 105.60kr
Switzerland: 7.63 CHF

TAILLE NORMALE MODÈLES

Cela ne comprend pas de très grands articles tels que les vélos électriques, les grands scooters et quad. La livraison prendra 2-5 jours ouvrables.

Germany: €10.00
Spain: €17.00
France: €11.00
Ireland: €7.40
Italy: €13.99
Netherlands: €9.99
Portugal: €19.99
Denmark: 112kr.
Sweden: 179kr
Switzerland: 23.80 CHF

TRES GRANDS ARTICLES

Très grands articles tels que les vélos électriques, les grands scooters et les vélos Quad. La livraison prendra 2-5 jours ouvrables.

Germany: €50 - €68
Spain: €59.99 - €72.00
France: €49.99 - €68.00
Ireland: €49.99 - €59.99
Italy: €59.99 - €68.00
Netherlands: €52.00 - €59.99
Portugal: €57.00 - €68.00
Denmark: 299kr - 499kr
Sweden: 429kr - 720kr
Switzerland: 39.99 CHF - 69.99 CHF
 
Seuls les utilisateurs enregistrés peuvent écrire des questions. Veuillez vous connecter ou créer un compte
Rédigez votre propre commentaire
Seuls les utilisateurs sauvegardés peuvent soumettre leur avis. Veuillez vous connecter ou créer un compte
To Top