Black Angel 450 BAMB4 – bladed 6Ch, 3D capable RC helicopter – is one of the most advanced 450 size 3D RC helicopters on the market. With innovative design and robust construction the Black Angel is able to outperform most rivals.The CopteX RC helicopter is build using the best materials and only the highest quality electronic components. The airframe is build of carbon fibre to reduce weights while increasing structural integrity, the main and rear rotor parts as well as tail boom are manufactured on the latest CNC machines from anodised lightweight aluminium (grey colur). The model comes with 6CH 2.4GHz radio equipment, carbon fibre rear rotor blades, high grade plastic main blades and glass fibre canopy. This RTF model will come 100% assembled, tuned and ready to fly. 

The CopterX CX450BAMB4 Black Angel is a model best suited to seasoned pilots looking for superior performance and durability.

FEATURES

    Features: 

  • +/- 15 extra wide pitch range
  • Oversized feather shaft, screws, blade grip bearing, main shaft collar, for maintenance free operation
  • reinforced swash plate for positive response
  • One piece CCPM swash plate design for durability
  • Simple head design for quick output and easy maintance
  • Fully ball raced capable to handle head speed of over 3500rpm and tail speed for over 13600rpm
  • Extra wide drive belt for trouble free and quick operation
  • Direct tail drive system weight saving and quicker response
  • Extra wide drive belt to ensure non slip and sensitive rudder control
  • High strength nylon main gear for quite and smooth operation
  • Precise high wear resistance aluminum alloy pulley set
  • One piece carbon fiber main frame for strength and durability
  • Light weight carbon fiber bottom plate, ESC mount, battery mount and anti rotation bracket
  • High strength aluminum alloy tail boom look
  • Aluminum alloy rudder servo mount
  • Light weight one piece composite landing skid
  • Plastic Canopy mounts to isolate canopy vibration
  • Light weight high strength glass fiber per painted canopy
  • CNC multi-blades rotor head system by high strength light weight aluminum
  • High strength almuninum plate for positive response
  • Special designed scale rotor blades especially for scale flight application
  • One piece CCPM swash plate design for durability
  • Fully ball raced
  • Extra wide drive belt for trouble free and quick operation
  • Direct tail drive system weight saving and quicker response
  • Extra wide drive belt to ensure non slip and sensitive rudder control
  • High strength nylon main gear for quite and smooth operation
  • Precise high wear resistance aluminum alloy pulley set
  • One piece carbon fiber main frame for strength and durability
  • Light weight carbon fiber bottom plate, ESC mount, battery mount and anti rotation bracket
  • High strength aluminum alloy tail boom look
  • Aluminum alloy rudder servo mount
  • Light weight one piece composite landing skid
  • Plastic Canopy mounts to isolate canopy vibration
  • Light weight high strength glass fiber per painted canopy

SPECIFICATIONS

  • Length: 653mm
  • Height: 240mm
  • Main Rotor: 714mm
  • Tail Rotor: 157mm
  • Motor Gear: 12T/13T
  • Main Gear: 150T
  • Autorotation Tail Drive Gear: 43T
  • Tail Drive Gear: 10T
  • Drive Gear Ratio: 1:12.5:4.3(12T) / 1:11.54:4.3(13T)
  • Weight(without electric parts): 370g
  • Weight(including electric parts): 760~800g
  • CopterX 3500Kv Brushless Motor x 1
  • CopterX 50A ESC x 1
  • CopterX 2.4G Transmitter & Receiver x 1
  • 9G Servo x 3
  • Fusonic 9257 Servo x 1
  • CopterX Gyro 240 x 1
  • Full Size Paper Case x 1
  • CopterX Balance Charger x 1
  • CopterX Li-Polymer Battery 11.1V 15C 2200mAh x 1

For more RC Helicopters please visit our website – www.nitrotek.co.uk

 

Ledbury Winter Finals day

Posted: 27th March 2012 by Lee in Uncategorized

The finish of ledbury winter series 11~12
 
Well what can i say but what a fantasic day sun, sun and more sun.
Right down to business.
I decided not to go out in pratice and let the others pull any moisture off the track so as not to get the car dirty or wet !. I was in the guest heats and finals as i had not done enough rounds to qualfy.
First round of heats and second corner in the warm up laps the car dropped the front almost to the floor, limped into the pits and found a shock shaft broke (*first breakage in three outings), thought my day was going to be a bad one !!!.
Next couple of heats with settings  left the same as my last outing at ledbury, things just got better and better.
In the last heat i thought i would try a couple of small changes and found they didn’t work, so from a !!!!! first heat to great subsequent heats.
Right finals, missed the A  by a second but was pole in the B and hoped for the bump.
My start was the best yet clean away and with 30 minutes to try and stay there, as each lap went by and after the first round of pit stops left the pits still leading, second stop ~still leading, third stop still leading and at the finish i was a lap up on the whole field.
Bump up.
A final starting from the back, i had a  clean start and with a few in front coming together at the first corner, i was now in the pack so for the rest of the 25 minutes i kept pushing as much as i could and slowly picked a few more places and finished 5th.
So from what i thought was going to be a bad day with the shock shaft break, the day got better and better.
The CLX just seems to get better and better, really working well and with mininal wear and only minor breakages it’s a great buggy and looking forward to the next outing.
 
Regards
Justin Twigg

Team Gsuk at Ledbury

Posted: 17th March 2012 by Lee in Uncategorized
Tags:

A short race report from Justin Twigg from Ledbury winter series
 
I was at my local track for the second time only with the CLX.
The first time out at ledury i was just plaged with engine problems, and then the air filter coming off aghhhh

Anyway on to the second outing the track was fairly dry in practice first thing and only got better and better.
First couple of rounds of heat’s started ok but just got better and better, and by the third round was lying 4th overall
Next couple of rounds tried altering  the setup’s which didn’t pay off and i went back to original setup for the final.
Started 4th and with a good clean start, managed to keep 4th after the first crner 
The final was quite a battle going from 5th back to 4th for most of it but in the closing stages got 3rd.
The car felt really good but i should learn to leave things alone and not change setup when thing are going well !.
To sum up the clx is getting better and better with no breakages and no problems
 

Dez Chand Memorial race

Posted: 8th March 2012 by Lee in Uncategorized

a race report from the dez chand meeting although a bit late.

Dez Chand memorial race

First of all let me just say it was a honor to of known Dez over the last year since visiting coventry car club. and to pay my respects at the meeting. Over £4000 was raised at the meeting by the rc community defiantly a great event that The organisers should be proud of.

Although the meeting was not about results this was Gsracings first team event and first time at the astro track at Coventry

The day started off with a damp track with most people electing to go out on angle spike which was a plus for the Clx as the car generates a lot of mechanical grip and forward traction in the *damp conditions.

My own clx was probably setup too soft even with the cut angles on, as I was grip rolling in certain sections of the track if I pushed too hard.*way too much mechanical grip from the car

I did think the rain would come during the day and continued with the soft setup hoping to take advantage of the softer setup later in the day.

But as the meeting continued the track dried out so this was defiantly not the way to go with setup and probably going up 10wt all round and back to kit spring would have been a better setup but as this was the first time out for my clx round coventry. This reflected on my qualifying position so you live and learn.

In hindsight I would liked to visit the track the week before for some practice time to learn the track and on the day stiffened everything up and switched to pins earlier in the day.

Overall my CLX performed great during the course of the day with no problems or breakages Proving That the CLX is a very robust machine.

The Team

We also had Ian boushear heading up the GS team.

Qualifying 6th in the B final ( although never raced there before) and choosing to change to minipins right before the start of the race as he felt the angles were too loose he ended up loosing 2 precious laps right from the start tone while a manic malc changed the tyres And threw him down the pit ramp to rejoin the back of the pack. Finishing 12 overall in the B From 2 laps down.

Justin Twigg also had a good weekend only running there once before the opposite way round the track qualifying 14th in the C and pushing from the back of the pack to Finnish 7th overall Justin’s comments on the the car were very easy to drive and plenty of grip with no problems with the build.

We did have other non team drivers running the GS that weekend as well.

for our first team out with no previous track time or practice the cars and drivers did a great job..

Sent from iPad

Gsuk at Swindon

Posted: 6th March 2012 by Lee in 1/8th Scale, Cars, GS Racing Team UK, Hints and tips, News
Tags:

Small race report from Dave Blount

I raced at swindon this weekend and it went pretty well. It was surprisingly warm and therefore a pretty good turnout with a couple of fast drivers. In attendance Qualifying went well, after the first round I was in pole. In round 2 i was out qualified.

but in round 3 I beat my previous time by a few seconds and was tq again.

I was very impressed with just how hard I could push the car. Starting from the front however didn’t really help with the final as my engine bogged badly off the line putting me back in around 4th or 5th. I got back into 2nd after a couple of laps but 3rd was pushing hard and was causing me to lose time on the leader trying to defend. The leader didn’t really make any mistakes but I slowly caught up and passed him around 6 mins in. I then stayed in the lead till the end and won the A final. The car was amazing and was very easy to put down some fast laps without making mistakes

After the final there was a dash for cash which is just a 10mins race but there are no marshalls so if you crash thats it. I did a steady 10 mins and won a very tense race. Overall I was very impressed with the car in the high grip conditions especially in the high speed corners and stability.

GS Racing Storm CLX Pro 1/8th Nitro Rc Buggy KIT

The CRAZYIST  4WD Hot Rod RC truck is a high spec model that is not only high quality and pro built but also highly upgradeable. This model is not to be confused with the entry level RC cars, this is a proper rc hobby racing machine! Aluminium centre drive shaft, high spec electronic speed control, aluminium capped oil filled shocks, performance differentials and much more.
As standard the rc TRUCK comes with a high precision 540 motor, HSP speed controller and 7.2V 1800mah battery pack. This setup gives more than enough power and speed for any serious racer. if you are the kind of person that likes to take things to the extreme then you can upgrade your model with a brushless kit (brushless motor, ESC and Li-po battery) the truck will go ridiculously quick and will take some real skill to control.The upgrade kit contains 1 x high power brushless motor, 1 x brushless ESC, 1 x 11.1V 2200mah LiPo battery and 1 x LiPo battery charger, please note that the kit is not installed, you will have to do it yourself.

FEATURES

  • Aluminium centre drive shaft
  • Powerful motor system
  • Large solid shock towers
  • High performance front/rear diffs
  • Powerful suspension
  • Eight oil filled aluminium capped shocks
  • Anti-skid tyres

SPECIFICATIONS

  • Length: 400mm
  • Height: 160mm
  • Width: 300mm
  • Wheelbase: 265mm
  • Gear Ratio 1 speed, 1:10.3
  • Ground Clearance: 34mm
  • Tyres: 58*118
  • Radio: Wheel type 3Ch AM
  • Motor : RC 540
  • ESC: HSP 03018
  • Battery: 7.2V 1800mah

 

Lightning 1/10TH Electric 4WD RC Desert Truck £94.99

 

The Lightning is a brushed short course RC truck. This model has a big brushed Rc540 motor and 7.4V 1800 mAh battery. The high grade plastic chassis and upper deck help to reduce weight and lower the centre of gravity, resulting in faster cornering and higher maximum speed (up to 30km/h), while the 4WD system with front and rear differentials evenly distributes the power to the wheels making this truck a real fun machine.
Vortex 1/10 4WD Electric RC Buggy £89.99

 

The Vortex 1/10 4WD RC buggy is a high spec model that is not only high quality but also highly upgradeable. We have all kinds of performance upgrades to improve the speed, driveability and looks. This model is not to be confused with the toy grade rc cars, this is a proper rc hobby racing machine with aluminium centre drive shaft, high spec electronic speed control, aluminium capped oil filled shocks, performance differentials and much more.
Team Nitrotek

 

 

 

Hi everyone,

It is a time to declare a competition winners for December 2011 and January 2012.

We had some interesting entries in December and January featuring tanks, radio controlled helicopters, a buggy, the Acme Monster Truck and many more.
Our December 2011 video competition winner featured our XSTR Electric Radio Control Buggy 2.4G on board camera performing some fun staff, this video has been submitted by Cecemoto. Congratulations and £100 of credit to you.

The winning entry for January 2012 comes from Cliff Churchill who sent us a video of his Taigen Hand Painted RC Tanks – Full Metal Upgrade Version – Tiger Camo. So congratualtions Cliff, you have won £100 worth of Nitrotek credit. And now you can sit back and enjoy this video.

So let’s see your February entries coming in, we’d love to see some 1/5 scale videos, and some of our new jets. Edit them, put them to music, roll the credits and get them uploaded. There’s £100 of Nitrotek credit up for grabs each and every month, so what are you waiting for!?

Team Nitrotek

www.nitrotek.co.uk

We have new arival of RC jets and RC palnes from Starmax, All the new model are RTF or ARF. One of the returning modeals is the F-14 Tomcat Jolly Rogers 6CH Twin EDF Top Gun RC Jet – RTF.  As you can tell from the discription, the radio controlled jet is ready to fly this time (used to have them PNP), and the PRICE IS FABULOUS!!!!  - Pre-Order at £289.99.

This model is an amazing 3D aerobatic aircraft, and capable of incredible speed. The twin engined punch that this plane packs allows it to perform a full aerobatic display: inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are all possible. If you’re really good you will be able to perform the famous ‘Cobra Manoeuvre’ with this Tomcat.*

 

 

This Nitrotek jet comes with a 2.4G radio which means the range is longer and more stable plus you do not have to worry about interference from other fliers. It is also equipped with a powerful brushless motor, for the best performance. The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight even in windy conditions. This aeroplane can take off from the ground or can be hand launched. The F-14 Jolly Rogers is an extremely high spec model; it features twin 60mm EDF jets, twin ESCs and a massive 3200mAh battery, making it very quick.

This plane is 80% assembled and so final finishes are needed before you can fly. Also everything you need is in the box, apart from 8 AA batteries, which you’ll need to power the radio contol transmitter.

One of the brand new models is this replica MIG-15 70mm EDF RC Jet with Retracts 2.4GHz. This Starmax replica of the MIG-15 is a top-level model aeroplane, featuring powerful 70mm EDF powered by a massive 2600KV brushless motor, retractable landing gear,10 installed servos including set for real air-brakes, the craftsmanship and factory finish that people come to expect from our models.The finish and design of this foam structured plane have been undertaken to a very high standard. The fuselage is both strong and extremely light, designed to withstand the occasional crash landing. It is complete with a detailed paint job and factory affixed decals to complete the realistic look of your MIG-15.

 

This is an amazing 3D aerobatic aircraft, capable of incredible speed and a full aerobatic display: inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads and spins are all possible. The MIG-15 RC Jet comes with working air brakes giving the model the ability to shorten takeoffs and slow touchdowns, just like the full-scale Mig-15! The jet is robustly build and extremely durable! Constructed of high quality durable EPO foam, best quality servos and very stable, smooth performance.
These two models are just an appetiser, for our full range of RC jets please wisit our website www.nitrotek.co.uk
Team Nitrotek

 

Dynam Pitts Python Model 12 – new model from Dynam £184.99

The Dynam Pitts Model 12 rc plane is combination of modern technology and beautiful classical design. The model looks realistic and is a fully capable aerobatics RC plane. Thanks to its lightweight, sturdy construction (EPO foam), precision electronics and powerful KV650 brushless outrunner motor it is able to perform a wide range of 3D aerobatics maneuvers. The model is almost fully factory pre-assembled and painted to a high standard. The Pitts remote control plane is a perfect choice for all who love classic looks and powerful technology.

The Pitts radio controlled plane is 80% factory assembled with fitted servos, motor and realistic paint finish. The Pitts’ power comes from KV650 brushless outrunner motor connected via a 50A ESC to a 14.8V 2200mAh 25C Lipo battery. The model is RTF (Ready to fly), so all you need is included in the box, but requires some assembly.

The radio equipment supplied with the plane is Dynam 4ch 2.4GHz transmitter and receiver, allowing many operators to fly at the same time as well as improved range.

Features

  • Durable and lightweight
  • 3D and Precision aerobatics designed
  • Equipped with a BM3720A-KV650 brushless outrunner Motor
  • Included Dynam 4 Channel 2.4GHz radio system
  • 14.8V 2200mAh 25C Li-Po battery and charger included

Specifications

  • Wingspan: 1067mm(42in)
  • Overall Length: 1130mm(44.5in)
  • Wing Loading: 43g/d㎡
  • Servo: 9gx2pcs,17gx2pcs
  • Battery: 14.8V 2200mAh 25C
  • Speed Controller: 50A
  • Motor: BM3720A-KV650
  • Flying Weight: 1300g(45.9oz)

We have received new batch of Taigen battle RC Tanks. The finish is very realistic, you can say these models have seen a battle or two plus the attention to detail is unbelievable. I must say I am really impressed with these tanks and the improvements which have been made on the previous (first model), much better more realistic paint job (matt finish – the previous had a semi-sheen to it, and better weathered look), maneuverability & speed is slower but more realistic due to the additional weight of the full metal versions–( approx. 7kg) compared to all other Taigen tanks.
We have currently  7 radio controlled tanks from Taigen in stock raging from £84.99 to the full metal pro model worth £179.99!

The fist group of Remote controlled tanks is Taigen Hand Painted – Smoke and Sound:
Taigen Hand Painted RC Tank – Tiger I

Nitrotek Price £84.99

Taigen Hand Painted RC Tank – Panzerkampfwagon III

Nitrotek Price £84.98

The second category of RC tanks is Taigen Hand Painted – Metal Upgrade. The Metal upgrade Taigen Tanks are equiped with metal tracks, sprockets and gearboxes, for increased durability and reliability.

Taigen Hand Painted RC Tanks – Metal Upgrade – Panther

Nitrotek Price £109.99

Taigen Hand Painted RC Tanks – Metal Upgrade – M26 Pershing

Nitrotek Price £114.98

Taigen Hand Painted RC Tanks – Metal Upgrade – Bulldog

Nitrotek Price £114.98

Taigen Hand Painted RC Tanks – Metal Upgrade – Panzer IV

Nitrotek Price £119.99

 

The third category of RC tanks is Taigen Hand Painted – Full Metal Upgrade. The Metal upgrade Taigen Tanks are equiped with metal tracks, sprockets, gearboxes and full metal body, This are the best spec models on the market!
Taigen Hand Painted RC Tanks – Full Metal Upgrade Version – Tiger Camo

Nitrotek Price £179.99

To make this magnificent RC tank a justice I have uploaded a video review by Mike